|
Analyzers
Continuous monitoring of toxic gases at ultra low ppb levels
directly integrated into life safety systems
|
 |
Vertex
Toxic Gas Monitoring System
Vertex combines the most advanced Chemcassette® software and
optics technologies into an easy to use, reliable gas
monitoring system. Vertex provides a cost-effective
monitoring solution that adapts to your changing gas
detection needs. |
 |
CM4
Continuous Gas Monitor
The CM4 provides monitoring of toxic gases at four
locations, up to 300 feet away - detection of ppb levels of
toxic gases at multiple points. Points are monitored
continuously. Leaks are detected within seconds. |
 |
Model IR-148
Infrared Gas Monitor
Model IR-148 detects solvents and gases such as HCFCs, HFCs
and PFCs, that are otherwise difficult to monitor without
the effect of cross-interfering gases. |
 |
IN-USA
Ambient Ozone Analyzers
Single and Multi-Point Ambient Ozone Analyzers
Microprocessor controlled.
UV absorption technique.
Dual field programmable alarms.
Highly stable optical system.
Measure up to 5 sample points with built-in field
programmable manifold / sequencer |
............................................................................................................................................................................
Fixed Controller System
The
control systems behind integrated ‘plant-wide’ fire and gas
detection.
 |
Metro Controller
Addressable, fully programmable
The Metro Controller is capable of monitoring up to 250
remote addressable flammable and toxic Metro gas
detectors. Together they form the Metro system designed to
protect people from flammable and toxic gas hazards commonly
found in car parks, tunnels or other areas where automotive
vehicles may operate. |
 |
System 57
Controller
System 57 brings future thinking to a new generation of gas
detection, alarm and control applications. In the new world
of intelligent gas detection system management, System 57
takes control.
Control Cards
3 levels of alarm
Individual, zoned, voted, master, time delayed, update and
rate of rise alarm facilities
Clear 4 part display
Peak reading capability
Sensor performance monitoring
5701 Control Card
5704 Control card
Engineering card |
 |
Touch Point 1
Self-contained, stand-alone
The Zareba Touchpoint 1 controller when used with any one of
the Sensepoint range of gas detectors provides 24 hour
protection from flammable, toxic or oxygen gas hazards. With
executive outputs to shutdown process equipment or drive
warning devices, the Touchpoint 1 is ideal for continuous
monitoring of small remote sites where it is inappropriate
or costly to monitor the area from a central location. |
 |
Touch Point 4
Accurate, easy to install
The Zareba Touchpoint 4 controller provides protection of
personnel and plant from flammable, toxic and oxygen gas
hazards when used with up to four Sensepoint gas detectors.
Self-contained, fully user configurable and wall mounted, a
Touchpoint 4 gas detection system can monitor gas hazards in
a large area or several discrete locations from a convenient
central site. |
 |
UniPoint
DIN rail mounted Controller
The Zareba Unipoint is a simple DIN rail mounted controller
offering integrators a flexible and low cost solution to
incorporate flammable, toxic or oxygen gas detection into
their control systems. Unipoint can be easily installed into
any plastic or metal enclosure for use indoor or outdoors
and even in potentially explosive atmospheres. With the
addition of one of the Zareba range of flammable, toxic or
oxygen detectors, systems may be configured to monitor gases
in a wide range of applications from car parks and boiler
houses to analyzer shelters or crane cabs in offshore
facilities. |
............................................................................................................................................................................
Personal Gas Detection
Effective personal protection from gas hazards, when and where its
needed
 |
Impact Pro
Multigas Monitor
The Impact range of portable multigas monitors is able to
monitor and display up to four gases simultaneously,
including flammable and oxygen gases, as well as up to two
further toxic gases. |
|
 |
Impact
Multigas Monitor
The Impact range of portable multigas monitors is able to
monitor and display up to 4 gases simultaneously, including
flammable and oxygen gases, as well as up to two further
toxic gases. |
 |
Enforcer
Calibration Accessory
Regulations require regular testing of gas monitoring
equipment to ensure that the instrument will work as and
when required. The Enforcer allows you to easily comply with
regulations when using an Impact multigas monitor without
the need for costly test facilities or third parties. |
|
 |
Safelink
Communication System
Safelink allows 2 Impact Pro portable multi-gas monitors to
be connected together such that the gas readings and
instrument status from one are repeated on the other. This
allows a co-worker in a confined space to be monitored
remotely, as well as providing a simple means to pass
messages back and forth. Emergency assistance can easily be
called by pressing and holding any button so that help is
never far away. |
 |
Safelink
Multigas Monitoring
Impulse X4 is an unsurpassed portable gas detector for
protection against flammable, oxygen, carbon monoxide and
hydrogen sulfide gas hazards. It´s ideal for use
by companies wanting advanced performance, reliability and
ease of use without the high costs of long term maintenance. |
 |
Impulse XT
Single Gas Monitor
The extraordinary single gas monitor from Honeywell
Analytics! |
 |
Impulse XP
Single Gas Monitor
The new Impulse XP is all about preferences. It delivers
advanced, full feature functionality, user configurability
with cost effective serviceability for a wide range of toxic
gases. |
 |
Safe - T - Cube
Transportable gas and alarm system for area monitoring
The Safe-T-Cube enables the Neotronics Impact personal gas
monitor to be used for area monitoring without any change to
the instrument itself. The Impact sits inside the
Safe-T-Cube to create transportable gas detection and alarm
system. |
............................................................................................................................................................................
Fire & Gas
Flame,
smoke & gas detectors coupled with sophisticated control solutions
for offshore and industrial applications
|
 |
Fire, Smoke & Gas
Detection Systems
Many industrial manufacturing or processing plants install
combined fire and gas detection systems to protect plant and
personnel.
Combined Fire and Gas Detection Systems
Reduced capital cost.
Integrated fire and gas detection alarm logic.
Application specific solutions.
Simplified supply / support logistics. |
 |
Searchflame 16
Optical Flame Detector
Searchflame 16 is a range of optical flame detectors
certified for use in designated hazardous areas. Two
versions are available, operating on the ultraviolet (UV) or
ultraviolet and infrared (UV / IR) detection principle. |
 |
Series 60
Smoke and Heat Detector
The Series 60 range of smoke and heat detectors includes
intrinsically safe (IS) versions which have been
specifically developed for use in hazardous areas. Honeywell
Analytics has chosen the Series 60 detectors due to their
known performance and compatibility with the System 57 rack. |
............................................................................................................................................................................
Sensors &
Transmitters
Comprehensive range of smart toxic, flammable and oxygen gas
detectors certified to the latest international standards
 |
Midas
Gas monitoring system
Midas® is a gas monitoring system for fast and reliable
response to the presence of virtually all of the gases used
or generated in the Semiconductor manufacturing industry.
Midas® offers lower cost of ownership benefits for gas
detection through a combinaton of extended sensor
calibration periods and flexible communications architecture
and patented diagnostics that monitor sensor performance and
flow control. |
|
 |
Searchline Excel
Infrared Detection System
Searchline Excel operates in potentially hazardous
environments, detecting the presence and build up of
explosive concentration of Hydrocarbon gas clouds.
Searchline Excel is certified to Exd and has the major
CENELEC and UL / CSA approvals for worldwide acceptance. |
 |
Searchpoint Optima Plus
Hydrocarbon Gas Detector
Searchpoint Optima Plus is an infrared point flammable
Hydrocarbon gas detector certified for use in potentially
explosive atmospheres. Searchpoint Optima Plus is ideal for
applications requiring the fastest speed of response,
reduced maintenance and fail safe operation. |
 |
Apex
Gas Detector and Transmitter
The Apex gas detector and transmitter has a wide range of
detectable flammable and toxic gases. The robust, hazardous
area certified, 316 stainless steel enclosure makes it
suitable for use in applications including oil and gas
distribution, petroleum extraction and chemical manufacture. |
 |
Sieger Sensepoint
Gas Detection Sensors
Sensepoint is a comprehensive range of gas detection sensors
for either combustible or toxic gases. The simple, extremely
rugged, high performance, polymer sensor housing contains
proven sensing elements which require very little
maintenance, and are designed to give years of service
before simple replacement. This range of high performance
gas sensors covers all the regular application needs of
major industrial plants. |
 |
Signal Point
Gas Detection Sensors
Signalpoint is a self-contained gas sensor system for either
combustible or toxic gases. It consists of a sensor with
integral junction box and cable entry, designed to make
installation simple and maintenance minimal. |
|
 |
705 H2S
H2S Sensor
The 705 H2S Sensor for the detection of hydrogen sulfide is
a low cost, explosion proof assembly fitted with a Sieger
long-life electrochemical cell.
705 Combustibel
Gas Sensor
The 705 Combustible Gas Sensor is a low cost, explosion
proof sensor assembly, fitted with Sieger poison-resistant
combustible gas detection elements. |
 |
High Temp Sensor
Sensepoint High Temperature Sensor
The Sensepoint High Temperature Sensor is a hazardous area
certified sensor for the detection of combustible
gases. Detection is via a single pair of catalytic beads
which provide reliable and stable monitoring.
Features
Low level (0-20% LEL) detection. Minimum alarm threshold 5%
LEL.
Certified for use in hazardous areas up to 150 °C.
Proven technology. Fast, reliable, poison resistant, stable
for low LEL detection ranges. |
 |
Sensepoint Pro
Self-contained, stand alone transmitter
The Sensepoint Pro provides comprehensive monitoring of
flammable, toxic and oxygen gas hazards in potentially
explosive atmospheres, both indoors and outdoors. Users can
modify detector operation using the remote control provided
without ever needing to open the unit. This enables one man,
non-intrusive, operation and reduces routine maintenance
time and costs. |
|
